DESCRIPTION
- Penetrating clear satin primer/sealer primarily for vertical surfaces
- water-based acrylic
- low odor and low VOC.
FEATURES
- Seal brick, stucco & concrete
- Rejuvenate old brick & plaster
- Brighten aluminum siding
- Prime vinyl siding
- Bind chalky surface
- Paint additive to extend life & coverage
- Buffer pH in hot cement
- Dustproofing and priming floors prior to painting
RECOMMENDED USE
- COVERAGE: 80–300 sq.ft. per gal., depending on surface porosity. Second coat application is 50% greater. Two coats are required for waterproofing bare, vertical concrete.DRY TIME: 2–4 hours, depending on temperature and humidity.
- TOPCOATING: May be topcoated with latex, oil-based or elastomeric coating when dry. PAINT ADDITIVE: 4–8 oz. of SEAL-KRETE Original can be mixed with one gallon of latex paint to improve spread rate.
- CLEAN-UP & STORAGE: Clean all tools immediately after use with soap and water. Store unused product in a dry place above 32°F (0°C). KEEP FROM FREEZING.
- LIMITATIONS: Use on above grade vertical surfaces or as a primer on horizontal surfaces – not for below grade use. Do not apply if rain is expected within 12 hours or if temperatures fall below 50°F within 24 hours of application. Do not use on swimming pools, bird baths, water features, cedar, redwood or in areas where hydrostatic pressure is likely to develop. Do not use on very porous substrates like low density, decorative block (use
- SEALKRETE Heavy-Duty instead). *Sanding or removing paint containing lead may be hazardous. For information contact the National Lead Information Center at 1-800-424-LEAD or www.epa.gov/lead.
FORMULA ANALYSIS
- Solids: 10%
- Proprietary Acrylic Resin
- Water Based
- Odor: Low
- Appearance: Milky White, Dries Clear
- VOC < 49 g/L – EPA Method 24 – Waterproofing Sealer Category
APPLICATION METHOD
- Read “LIMITATIONS” section before use. This sealer is ready to use; do not dilute. Apply with a brush, roller or sprayer (garden or airless). Backroll spray applications to ensure penetration. Apply at least two coats, allowing two hours dry time between coats. Remove any overspray immediately with water. Note: Sealer goes on milky white but dries clear.
- COVERAGE GUIDELINES
- Material Coverage
- Approx. sq.ft./gal.
- Stucco/Simulated Brick 150
- Concrete Slab/Tilt-ups 175
- Concrete Blocks 80
- Brick 125
- Wood Fencing 175
- Aluminum Siding 300
- Galvanized Metal 300
- Adobe 100
- Chalky Surfaces 300
- Note: Actual coverage will vary depending on porosity of surface. Use a highsolids formula, like SEAL-KRETE Heavy Duty, for low density, decorative block (split-face/fluted block).
SURFACE PREPARATION
- Surface must be clean and dry.
- Remove loose paint and excessive chalk.
- Repair cracks and surface breaks.
- Cover windows, doors, etc. and use caution when applying on windy days.
WARNING
- Avoid contact with eyes and prolonged contact with skin.
- Do not ingest. In case of eye contact, flush thoroughly with water. For skin contact, wash with soap and water.
- If swallowed, do not induce vomiting. Drink 1–2 glasses of water and get medical attention.
- KEEP OUT OF REACH OF CHILDREN
WARRANTY
- A limited 5-year warranty is available on the quality and performance of this product on a per job basis. Contact our technical service department for details on this warranty program. Otherwise, manufacturer/ seller makes no warranty of any kind except that this product is free from defect and is of merchantable quality.
- Buyer remedy for breach of warranty is limited to replacement of SEAL-KRETE product or refund of purchase price. Convenience Products will not be responsible for labor or the cost of labor for removal or application of any product.
- TECHNICAL SUPPORT: For more information on surface prep or application guidelines, or to obtain a Material Safety Data
Sheet, call 1-800-323-7357, M–F (8:00 am–5:00 pm EST) or visit our website at www.seal-krete.com.
Reviews
There are no reviews yet.