DESCRIPTION
- Rust-Oleum 7 Year Fibered Aluminum Roof Coating is a metallic pigmented coating used for rustproofing and weatherproofing metal roofs and sidewalls, and as a reflective coating for built-up roofing (BUR) and modified bitumen roof systems.
- Rust-Oleum 7 Year Fibered Aluminum Roof Coating reflects heat, prevents corrosion, and protects against mild acid and alkali fumes on a variety of substrates, including metal, transite, built-up roofing and modified bitumen.
- This reflective coating protects low and steep slope roofs from harmful UV damage while supporting overall energy efficiency.
FEATURES
- SATISFACTION GUARANTEED*: If you are dissatisfied with this product contact Rust-Oleum product support at 1-844-888-0482 for product replacement or a refund.
- Provide proof of purchase and refer to the product number and batch code on the can.
RECOMMENDED USE
- SPRAY EQUIPMENT RECOMMENDATION: Pumps: Graco® King 45:1, Graco® Bulldog 30:1 or gas powered equivalents.
- Graco® GH733, HydraMax 350 or GMax 7900 or other manufacturers’ equivalents. Hose/Pressure: 50’ –300’ length (depending on spray rig pressure).
- When using hoses longer than 100’ use the next larger hose ID every 50’. Every 50’ of hose will reduce the spray pressure of the rig by 10% at the gun tip, i.e. 300 hose – 3 /4” (50’/100’) to 5 /8” (50’/100’) to 1 /2” (50’/100’) to 3/8” (50’) Good results are generally obtained @ 2000–3000 psi at spray tip.
- Gun: Graco® Contractor Gun, Graco® Contractor FTx gun, Graco® Silver Plus or equivalent. (Tip extrusions or pole guns can be used.) DRY TIME: 24 hours.
- Environmental or site specific conditions may require variations in cure times.
- CLEANUP: Mineral spirits. Wipe up splatters before they dry. Follow equipment manufacturer’s directions to clean spray equipment. LIMITATIONS: Do not apply when air surface temperature is below 40°F or when rain is imminent.
- Not recommended for use over tar surfaces, slate, tile, wood, shingles, or where water ponds. Do not apply over newly installed asphalt built-up roofs without allowing the roof to weather a minimum 60-90 days.
FORMULA ANALYSIS
- VOC <500 g/L*
APPLICATION METHOD
- Rust-Oleum 7 Year Fibered Aluminum Roof Coating can be applied by brush, roller, or spray gun to specified coverage rates.
- Do not thin.COVERAGE: Over metal 2 gal./100 sq. ft.; Over corrugated and irregular metal surfaces, allow for additional surface area by multiplying square feet by 1.15 minimum; Over smooth Built-Up/Modified Bitumen Roofing 2 1/2 gal./100 sq. ft.
- The surface dictates the actual coverage. The amounts shown are intended as minimum application information.
SURFACE PREPARATION
- SURFACE PREPARATION: All surfaces must be clean and free from dirt, grease, oil, mold, algae, loose granules, loose paint, rust, excess chalk, and other foreign matter which could prevent proper adhesion.
- Use a high pressure wash of at least 2,000 psi. Clean with RUST-OLEUM ROOF & SIDING CLEANER to remove all grease or oily deposits.
- Seams should be sealed and waterproofed and roof penetrations should be flashed prior to applying the topcoat.
- Do not thin. Stir well before and during use. All surfaces must be clean and dry. Metal: Rust and flaking or peeling paint shall be wire brushed, scraped, or pressure washed to ensure a sound surface. No priming is necessary. Seams, fasteners, and protrusions shall be repaired as needed.
- BUR / Modified Bitumen: Torn flashings, faulty copings, parapet walls, large blisters, and surface breaks shall be repaired.
WARNING
- CONTAINS CRYSTALLINE SILICA HARMFUL IF INHALED. Inhalation of crystalline silica can cause cancer. Risk of cancer depends on duration and level of exposure to dust generated from sanding surfaces or spray mist. When sanding or spraying product use.
- LIQUID PAINT AND VAPOR MAY CAUSE IRRITATION: Use only with adequate ventilation. To ensure fresh air entry during application and drying, open all windows and doors.
- If headache or dizziness is experienced during use leave area for fresh air.
- DO NOT TAKE INTERNALLY: Paint contains glycol ethers. May be harmful if swallowed in large quantities.
- Avoid contact with eyes, skin or clothing. Can cause irritation.
- Warning: This product contains chemicals known to the state of California to cause cancer and/or birth defects or other reproductive harm.
- FIRST AID: INHALATION: If excessive exposure symptoms are experienced, leave area to obtain fresh air.
- If difficulty continues, get medical assistance immediately.
- Ingestion: Do not induce vomiting. Get medical attention immediately.
- EYE CONTACT: Flush immediately with plenty of water for at least 15 minutes.
- SKIN CONTACT: Wash thoroughly with soap and water.
WARRANTY
- This is TrueValue® American Product. Made in USA.
- Limited Warranty Policy: If for any reason you are not completely satisfied with this product, return container with receipt to store where purchased for refund.
- Since application is beyond our control, this policy does not include reimbursement for any labor or other costs. Terms & Conditions apply…
COLORS AVAILABLE
- True Value paint has more than 2,000 paint colors from which to choose. Learn about color schemes and how to come up with great paint color ideas.
- Plese Select Your Colors: COLOR GALLERY: Use our Color Gallery’s virtual paint swatches to choose from a selection of popular paint colors and create a captivating paint palette. Keep it simple with comfortable neutrals, play up accent colors or introduce the bright pop of a complementary color to make a refreshing statement in your home this weekend.
- https://www.truevaluepaint.com/explore-color/color-gallery/
Reviews
There are no reviews yet.